No products in the cart.
BaseCam Distributor Europe — SimpleBGC Gimbal Controllers
BaseCam Electronics Official Distributor in Europe
Official BaseCam Electronics distributor in Europe. SimpleBGC 32-bit gimbal controllers, IMU sensors, CAN motor drivers, magnetic encoders and gimbal motors — the complete stabilisation ecosystem. EU invoicing, 0% VAT for EU business buyers, worldwide FedEx delivery.
Developed and manufactured in Riga, Latvia. European engineering, European supply chain, and a two-hour drive from our warehouse in Tallinn. No transpacific lead times, no customs, no counterfeit risk.
What you actually need to build a gimbal
A stabilisation system is not one part. This is the question we answer most often, so here is the whole picture before the product lists.
| Component | What it does | Required? |
|---|---|---|
| Controller | Runs the stabilisation algorithm and drives the motors | Always |
| IMU sensor | Measures orientation. Mounted on the camera platform | Always |
| Second IMU | Mounted on the frame. Improves performance on moving platforms | Recommended for UAV |
| Brushless motors | One per axis. Direct drive, no gearing | Always |
| Magnetic encoders | Absolute position feedback. Removes calibration drift, enables higher precision | For professional builds |
| Motor drivers | External drivers, needed only with the CAN_MCU controller | Depends on controller |
Most controllers have motor drivers built in. The exception is the CAN_MCU, which is designed to work with separate CAN driver modules — useful when motors sit far from the controller or when you are building a distributed system.
Choosing your controller
| Controller | Motor drivers | Best for |
|---|---|---|
| SimpleBGC 32-bit Regular | Built in | The standard choice. Small, medium and large gimbals, handheld and boom-mounted rigs, UAV payloads |
| SimpleBGC 32-bit Tiny | Built in | Same functionality in a smaller package. Micro platforms and space-constrained builds |
| SimpleBGC 32-bit Extended | Built in | Adds firmware features unavailable on Regular and Tiny. Encoder support, multi-IMU configurations |
| SimpleBGC 32-bit Pro | Built in | Top of the range. Demanding cinema and professional stabilisation work |
| SimpleBGC 32-bit OEM | Built in, external optional | Designed to be embedded into your own host board rather than used standalone. Series production |
| SimpleBGC 32-bit CAN_MCU | None — external required | Distributed systems using CAN driver modules. Integrated 30 A power switch with overcurrent and undervoltage protection |
Not sure which fits? Tell us the camera or sensor weight, the platform it mounts to, and whether you need encoders and we will specify the full build.
Why encoders change everything
Without encoders, the controller estimates motor position from the IMU alone. That works, but it drifts, needs recalibration, and struggles when the camera is knocked or the platform manoeuvres hard.
Magnetic encoders such as the AS5048 give absolute angular position on every axis. The result is faster startup with no calibration dance, recovery from physical disturbance, better performance near the gimbal limits, and noticeably smoother tracking. For anything carrying an expensive camera or a survey sensor, encoders are not an upgrade — they are the baseline.
Encoder support requires a compatible controller. The Extended and Pro versions handle it; check before ordering, or ask us.
The full ecosystem, in stock
Controllers
SimpleBGC 32-bit in Regular, Tiny, Extended, Pro, OEM and CAN_MCU versions, including one and two-IMU sets.
IMU sensors
Standard I2C IMU modules and CAN_IMU units. The CAN interface allows longer cable runs and cleaner wiring on larger gimbals.
Motor drivers
CAN Driver modules and I2C_Drv drivers for use with the CAN_MCU controller and distributed builds.
Encoders
AS5048 magnetic encoders in on-axis and off-axis configurations, plus magnets and mounting hardware.
Gimbal motors
Direct-drive brushless motors across the size range, including versions supplied with encoders already fitted — which saves the fiddliest part of the build.
Cables and accessories
Slip rings, connectors, harnesses and the interface parts that hold a build together.
By application
UAV camera and sensor payloads
Airframes vibrate and manoeuvre, which is harder on a stabilisation system than handheld use. A two-IMU configuration — one on the camera platform, one on the frame — lets the controller separate aircraft motion from camera motion. Encoders are strongly recommended.
Inspection and survey platforms
Energy, infrastructure and construction work needs stable sensor orientation for accurate imaging and usable data. Precision matters more than cinematic smoothness, which puts encoders and a controller that supports them at the centre of the build.
Film and broadcast
SimpleBGC has been the backbone of custom cinema rigs for years, in handheld and boom-mounted systems worldwide. The Pro and Extended controllers drive cinema-grade payloads when properly configured.
Robotics and ground platforms
Stabilised sensors for navigation and perception on UGV and USV platforms. The same architecture applies — the difference is usually mounting and vibration profile rather than the electronics.
OEM and series production
The OEM controller is built to be embedded into your own motherboard rather than bolted on. It exposes a full interface set — SPI, PWM, I2C, CAN, three UARTs, seven SDIO and three ADC — and an OEM development board is available for evaluation before you commit to a layout.
Why buy BaseCam from A-Trix Group
Official distribution, genuine hardware. Supplied through the official channel with manufacturer warranty and firmware support. Counterfeit SimpleBGC boards circulate widely, and a clone that fails mid-flight takes the camera with it.
European from end to end. BaseCam develops and manufactures in Riga; we stock and ship from Tallinn. Both inside the EU, both inside the customs union — no import duty, no clearance paperwork, no six-week wait.
Express shipping at contract rates. We ship worldwide under a FedEx contract, so delivery costs materially less than the published rates.
We know the architecture, not just the part numbers. Which controller supports encoders. Whether your build needs one IMU or two. When CAN drivers are worth the extra complexity. Our team includes developers from Riga Technical University — the same city BaseCam is built in — working with our founder, a Senior Member of IEEE, lecturer at Riga Technical University, and author of registered patents in AI and unmanned systems.
One supplier for the whole payload. Controller, motors, encoders, IMU and cables on one invoice — plus the autopilot, GNSS and camera if you need them. We also stock CubePilot, Drotek, TOPOTEK, T-MOTOR and SIYI.
Who we supply
- Gimbal and payload manufacturers
- UAV and UGV integrators building custom payloads
- Inspection and survey operators
- Film and broadcast rig builders
- Robotics developers
- Research institutes and universities
About BaseCam Electronics
BaseCam Electronics, based in Riga, Latvia, develops gimbal stabilisation controllers, motion control systems and sensor modules. Its SimpleBGC platform — often still called AlexMos after the original design — became the de facto standard for custom camera stabilisation and is deployed in systems worldwide.
Controllers are configured through the SimpleBGC GUI, available for Windows, macOS, Linux and Android, with upgradable firmware. The platform integrates with ArduPilot on Copter, Plane and Rover via MAVLink or a custom serial protocol, which is why it appears so often alongside CubePilot autopilots.
Frequently asked questions
Is A-Trix Group an official BaseCam distributor?
Yes. A-Trix Group OÜ is an official BaseCam Electronics distributor supplying the European market, with genuine hardware and manufacturer warranty.
Which controller should I choose?
The Regular version covers most builds. Choose Tiny if space is tight, Extended or Pro if you need encoder support and the advanced firmware features, OEM if you are embedding the controller into your own board, and CAN_MCU if you are using external CAN motor drivers.
Do I need one IMU or two?
One IMU on the camera platform is the minimum. A second IMU on the frame lets the controller distinguish platform motion from camera motion, which matters on UAVs and vehicles. For airborne use, two is the practical choice.
Are encoders worth it?
For professional work, yes. Encoders give absolute position feedback, which removes calibration drift, allows recovery from physical disturbance and improves precision near the gimbal limits. They require a controller that supports them.
Does SimpleBGC work with ArduPilot and PX4?
Yes. SimpleBGC communicates with ArduPilot on Copter, Plane and Rover using MAVLink or a custom serial protocol.
Do you supply in volume for production?
Yes. Send your configuration and quantities and we will quote against a delivery schedule.
Can I buy without VAT?
Yes. Business customers with a valid EU VAT number registered outside Estonia are invoiced at 0% VAT under the reverse charge mechanism.
Tell us what you are stabilising and what it weighs
A-Trix Group OÜ — official BaseCam Electronics distributor in Europe. Tallinn, Estonia. EU invoicing, EU warranty, worldwide FedEx delivery.